Extruded Aluminum Angles
Minimum Order Quantity: 1000 kg (1.1 US Tons) Per Shape Request a Free QuoteHigh-Quality Extruded Aluminum Angles – Always Delivered On Time
Extruded aluminum angles are often used for structural and architectural applications. They are available in 6061, 6063, and other alloys and are heat treated to maximize strength. They are lightweight, recyclable, and corrosion-resistant. We work with ISO 9001 certified extruders in India to help you lower your costs while getting high quality. Our team is on-site to monitor output providing great service and on-time delivery.
⚠️ Please note that our minimum order quantity (MOQ) is 1000 kg (1.1 US Tons) per shape. ⚠️
Shape #1 – Equal Angle (99 Open Dies)
Below is a list of open dies for this equal aluminum angle. The dies are located at our partner extrusion plant in India. These profiles are manufactured in India for export to Europe, North America, Australia and more. Profiles range in size from 12.00mm-long legs all the way up to 100.00mm and 1/2 inch up to 4 1/2 inches. There are 99 dies for this shape.
| SL No | Section No | A (mm) | T (mm) | Weight kg/m |
|---|---|---|---|---|
| 1 | J-S4683 | 6 | 1.5 | 0.042 |
| 2 | J-16496 | 11 | 0.37 | 0.022 |
| 3 | J-16442 | 11 | 0.47 | 0.027 |
| 4 | J-16425 | 12 | 0.53 | 0.033 |
| 5 | J-16500 | 12 | 1.3 | 0.079 |
| 6 | J-16401 | 12.7 (1/2 in.) | 0.75 (0.03 in.) | 0.05 |
| 7 | J-16402 | 12.7 (1/2 in.) | 1.52 (0.06 in.) | 0.098 |
| 8 | J-16403 | 12.7 (1/2 in.) | 3.18 (0.125 in.) | 0.191 |
| 9 | J-16459 | 15 | 1.3 | 0.1 |
| 10 | J-16497 | 16.8 | 0.34 | 0.03 |
| 11 | J-16443 | 16.8 | 0.39 | 0.035 |
| 12 | J-16426 | 18 | 0.6 | 0.057 |
| 13 | J-16454 | 19 | 0.8 | 0.079 |
| 14 | J-16404 | 19.05 (3/4 in.) | 0.62 (0.024 in.) | 0.064 |
| 15 | J-16462 | 19.05 (3/4 in.) | 1 (0.039 in.) | 0.099 |
| 16 | J-16405 | 19.05 (3/4 in.) | 1.31 (0.052 in.) | 0.13 |
| 17 | J-16450 | 19.05 (3/4 in.) | 1.6 (0.063 in.) | 0.158 |
| 18 | J-16478 | 19.05 (3/4 in.) | 2 (0.079 in.) | 0.195 |
| 19 | J-16460 | 19.05 (3/4 in.) | 2.25 (0.089 in.) | 0.218 |
| 20 | J-16436 | 19.05 (3/4 in.) | 2.75 (0.108 in.) | 0.262 |
| 21 | J-16406 | 19.05 (3/4 in.) | 3.18 (0.125 in.) | 0.299 |
| 22 | J-16446 | 20 | 1.2 | 0.126 |
| 23 | J-16486 | 20 | 2 | 0.205 |
| 24 | J-16444 | 21 | 0.46 | 0.052 |
| 25 | J-16498 | 23 | 0.55 | 0.067 |
| 26 | J-16427 | 23 | 0.62 | 0.076 |
| 27 | J-16433 | 23.5 | 1.9 | 0.231 |
| 28 | J-16455 | 25 | 1.3 | 0.17 |
| 29 | J-16424 | 25 | 1.5 | 0.196 |
| 30 | J-16463 | 25 | 1.8 | 0.234 |
| 31 | J-16422 | 25 | 2 | 0.259 |
| 32 | J-16441 | 25.4 (1 in.) | 0.8 (0.031 in.) | 0.108 |
| 33 | J-16408 | 25.4 (1 in.) | 1.01 (0.04 in.) | 0.137 |
| 34 | J-16407 | 25.4 (1 in.) | 1.22 (0.048 in.) | 0.163 |
| 35 | J-16451 | 25.4 (1 in.) | 1.6 (0.063 in.) | 0.213 |
| 36 | J-16461 | 25.4 (1 in.) | 2.1 (0.083 in.) | 0.273 |
| 37 | J-16474 | 25.4 (1 in.) | 2.25 (0.089 in.) | 0.295 |
| 38 | J-16409 | 25.4 (1 in.) | 3.18 (0.125 in.) | 0.409 |
| 39 | J-16449 | 25.4 (1 in.) | 5 (0.197 in.) | 0.618 |
| 40 | J-16456 | 28 | 1.8 | 0.263 |
| 41 | J-16457 | 28 | 2.5 | 0.36 |
| 42 | J-16445 | 29 | 0.59 | 0.091 |
| 43 | J-16464 | 30 | 1.8 | 0.283 |
| 44 | J-16447 | 30 | 2 | 0.313 |
| 45 | J-16468 | 30 | 2.8 | 0.432 |
| 46 | J-16448 | 30 | 3 | 0.462 |
| 47 | J-16418 | 30 | 5 | 0.742 |
| 48 | J-16431 | 31.75 (1 1/4 in.) | 0.72 (0.028 in.) | 0.122 |
| 49 | J-16410 | 31.75 (1 1/4 in.) | 1.57 (0.062 in.) | 0.262 |
| 50 | J-16411 | 31.75 (1 1/4 in.) | 3 (0.118 in.) | 0.488 |
| 51 | J-16472 | 32 | 5 | 0.797 |
| 52 | J-16428 | 35 | 1.1 | 0.204 |
| 53 | J-16477 | 35 | 3.4 | 0.61 |
| 54 | J-16489 | 35 | 4 | 0.712 |
| 55 | J-16458 | 38 | 2.8 | 0.553 |
| 56 | J-16482 | 38 | 5 | 0.959 |
| 57 | J-16432 | 38.1 (1 1/2 in.) | 1.22 (0.048 in.) | 0.247 |
| 58 | J-16499 | 38.1 (1 1/2 in.) | 1.5 (0.059 in.) | 0.302 |
| 59 | J-16412 | 38.1 (1 1/2 in.) | 1.57 (0.062 in.) | 0.316 |
| 60 | J-16479 | 38.1 (1 1/2 in.) | 2.25 (0.089 in.) | 0.449 |
| 61 | J-16453 | 38.1 (1 1/2 in.) | 2.5 (0.098 in.) | 0.497 |
| 62 | J-16483 | 38.1 (1 1/2 in.) | 2.76 (0.109 in.) | 0.546 |
| 63 | J-16502 | 38.1 (1 1/2 in.) | 3 (0.118 in.) | 5.93 |
| 64 | J-16413 | 38.1 (1 1/2 in.) | 3.18 (0.125 in.) | 0.627 |
| 65 | J-16414 | 38.1 (1 1/2 in.) | 4.78 (0.188 in.) | 0.921 |
| 66 | J-16421 | 38.1 (1 1/2 in.) | 6.35 (0.25 in.) | 1.197 |
| 67 | J-16484 | 38.1 (1 1/2 in.) | 5.8 (0.228 in.) | 1.102 |
| 68 | J-16452 | 40 | 2.5 | 0.523 |
| 69 | J-16465 | 40 | 2.8 | 0.584 |
| 70 | J-16438 | 40 | 3 | 0.623 |
| 71 | J-16423 | 40 | 4 | 0.82 |
| 72 | J-16435 | 40 | 5 | 1.013 |
| 73 | J-16419 | 45 | 5 | 1.147 |
| 74 | J-16437 | 50 | 1 | 0.267 |
| 75 | J-16488 | 50 | 2 | 0.529 |
| 76 | J-16469 | 50 | 2.8 | 0.735 |
| 77 | J-16440 | 50 | 3 | 0.786 |
| 78 | J-16491 | 50 | 4 | 1.036 |
| 79 | J-16473 | 50 | 6 | 1.523 |
| 80 | J-16481 | 50 | 8 | 1.987 |
| 81 | J-16485 | 50 | 5 | 1.282 |
| 82 | J-16487 | 50.8 (2 in.) | 1.6 (0.063 in.) | 0.432 |
| 83 | J-16501 | 50.8 (2 in.) | 3.18 (0.125 in.) | 0.845 |
| 84 | J-16415 | 50.8 (2 in.) | 4.78 (0.188 in.) | 1.249 |
| 85 | J-16494 | 50.8 (2 in.) | 6 (0.236 in.) | 1.548 |
| 86 | J-16430 | 50.8 (2 in.) | 6.35 (0.25 in.) | 1.633 |
| 87 | J-16439 | 60 | 6 | 1.847 |
| 88 | J-16503 | 60 | 8 | 2.419 |
| 89 | J-16480 | 63 | 3 | 0.996 |
| 90 | J-16416 | 63.5 (2 1/2 in.) | 4.78 (0.188 in.) | 1.577 |
| 91 | J-16420 | 63.5 (2 1/2 in.) | 6.35 (0.25 in.) | 2.067 |
| 92 | J-16470 | 75 | 2.7 | 1.074 |
| 93 | J-16475 | 75 | 3 | 1.191 |
| 94 | J-16417 | 75 | 4.78 | 1.873 |
| 95 | J-16434 | 76.2 (3 in.) | 9.52 (0.375 in.) | 3.673 |
| 96 | J-16429 | 80 | 8 | 3.283 |
| 97 | J-16492 | 100 | 10 | 5.13 |
| 98 | J-16490 | 114.3 (4 1/2 in.) | 6.35 (0.25 in.) | 3.81 |
| 99 | J-16493 | 160 | 12 | 9.979 |
Shape #2 – Unequal Angle (74 Open Dies)
Below is a list of open dies for this unequal aluminum angle. The dies are located at our partner extrusion plant in India. These profiles are manufactured in India for export to Europe, North America, Australia and more. Profiles range in size from 13.00mm leg length up to 203.00mm and 3/4 in. up to 6 in. There are 74 dies for this shape.
| SL No | Section No | A (mm) | B (mm) | T (mm) | Weight kg/m |
|---|---|---|---|---|---|
| 1 | J-16763 | 14.9 | 9.9 | 2 | 0.123 |
| 2 | J-16756 | 16 | 10 | 0.41 | 0.028 |
| 3 | J-16790 | 16 | 10 | 0.7 | 0.048 |
| 4 | J-16732 | 16.5 | 10.5 | 0.49 | 0.035 |
| 5 | J-16729 | 18 | 10 | 1.6 | 0.114 |
| 6 | J-16757 | 19 | 12 | 1.23 | 0.098 |
| 7 | J-16719 | 19.05 (3/4 in.) | 12.7 (1/2 in.) | 0.62 (0.024 in.) | 0.052 |
| 8 | J-16701 | 19.05 (3/4 in.) | 12.7 (1/2 in.) | 0.79 (0.031 in.) | 0.066 |
| 9 | J-16734 | 19.5 | 10 | 2 | 0.148 |
| 10 | J-16760 | 19.5 | 15.88 | 2.38 | 0.212 |
| 11 | J-16738 | 22 | 10 | 1.6 | 0.131 |
| 12 | J-16744 | 22 | 12.7 | 3 | 0.257 |
| 13 | J-16754 | 22.25 | 12.7 | 2 | 0.178 |
| 14 | J-16733 | 22.5 | 11 | 0.5 | 0.044 |
| 15 | J-16775 | 25 | 9.6 | 1.7 | 0.151 |
| 16 | J-16780 | 25 | 11 | 0.8 | 0.076 |
| 17 | J-16787 | 25 | 16 | 2.3 | 0.24 |
| 18 | J-16717 | 25 | 16 | 2.5 | 0.259 |
| 19 | J-16721 | 25.4 (1 in.) | 12.7 (1/2 in.) | 0.64 (0.025 in.) | 0.065 |
| 20 | J-16720 | 25.4 (1 in.) | 12.7 (1/2 in.) | 1.22 (0.048 in.) | 0.121 |
| 21 | J-16702 | 25.4 (1 in.) | 12.7 (1/2 in.) | 1.57 (0.062 in.) | 0.154 |
| 22 | J-16773 | 25.4 (1 in.) | 19.05 (3/4 in.) | 1.6 (0.063 in.) | 0.185 |
| 23 | J-16704 | 25.4 | 20.64 | 1.98 | 0.235 |
| 24 | J-16777 | 28.04 | 21.69 | 2.64 | 0.335 |
| 25 | J-16736 | 30 | 20 | 3 | 0.381 |
| 26 | J-16769 | 30 | 25 | 3 | 0.421 |
| 27 | J-16706 | 31.75 (1 1/4 in.) | 19.05 (3/4 in.) | 3.18 (0.125 in.) | 0.409 |
| 28 | J-16723 | 37 | 24 | 24 | 0.13 |
| 29 | J-16788 | 38 | 25 | 25 | 0.358 |
| 30 | J-16743 | 38.1 | 22.22 | 22.22 | 0.39 |
| 31 | J-16742 | 38.1 (1 1/2 in.) | 25.4 (1 in.) | 1.82 (0.072 in.) | 0.303 |
| 32 | J-16749 | 38.1 (1 1/2 in.) | 25.4 (1 in.) | 2.36 (0.093 in.) | 0.39 |
| 33 | J-16708 | 38.1 (1 1/2 in.) | 25.4 (1 in.) | 3.18 (0.125 in.) | 0.517 |
| 34 | J-16726 | 38.1 (1 1/2 in.) | 25.4 (1 in.) | 4.75 (0.187 in.) | 0.753 |
| 35 | J-16711 | 24 | 20 | 3 | 0.461 |
| 36 | J-16771 | 25 | 22 | 2 | 0.345 |
| 37 | J-16779 | 22.22 | 25.4 (1 in.) | 1.5 (0.059 in.) | 0.276 |
| 38 | J-16765 | 45 | 25 | 4 | 0.712 |
| 39 | J-16724 | 49 | 24 | 1.1 | 0.218 |
| 40 | J-16748 | 50 | 25 | 2.3 | 0.451 |
| 41 | J-16768 | 50 | 25 | 3 | 0.583 |
| 42 | J-16716 | 50 | 25.4 | 5 | 0.95 |
| 43 | J-16766 | 50 | 30 | 3 | 0.623 |
| 44 | J-16772 | 50 | 40 | 4 | 0.928 |
| 45 | J-16753 | 50.8 (2 in.) | 25.4 (1 in.) | 3.48 (0.137 in.) | 0.683 |
| 46 | J-16709 | 50.8 (2 in.) | 38.1 (1 1/2 in.) | 6.35 (0.25 in.) | 1.415 |
| 47 | J-16755 | 55.3 | 30 | 1.5 | 0.339 |
| 48 | J-16758 | 55.3 | 28.3 | 2.5 | 0.547 |
| 49 | J-16764 | 60 | 25 | 8 | 1.663 |
| 50 | J-16747 | 60 | 30 | 1.4 | 0.335 |
| 51 | J-16739 | 60 | 40 | 3 | 0.786 |
| 52 | J-S5258 | 60 | 40 | 8 | 1.987 |
| 53 | J-16783 | 60 | 50 | 3 | 0.866 |
| 54 | J-16737 | 60 | 50 | 8 | 2.203 |
| 55 | J-16751 | 63 | 38 | 5 | 1.295 |
| 56 | J-16718 | 63.5 (2 1/2 in.) | 19.05 (3/4 in.) | 1.22 (0.048 in.) | 0.268 |
| 57 | J-16774 | 63.5 | 22.23 | 3.18 | 0.708 |
| 58 | J-16761 | 68.15 | 15.05 | 3 | 0.649 |
| 59 | J-16789 | 70 | 20 | 3 | 0.704 |
| 60 | J-16782 | 75 | 50 | 5 | 1.62 |
| 61 | J-16735 | 80 | 50 | 5 | 1.688 |
| 62 | J-S5283 | 80 | 60 | 10 | 3.509 |
| 63 | J-16792 | 100 | 20 | 4 | 1.252 |
| 64 | J-16741 | 100 | 40 | 3 | 1.11 |
| 65 | J-16791 | 100 | 50 | 5 | 1.957 |
| 66 | J-16784 | 100 | 50 | 5 | 1.957 |
| 67 | J-16785 | 100 | 50 | 6 | 2.332 |
| 68 | J-16786 | 100 | 50 | 8 | 3.067 |
| 69 | J-16762 | 101 | 76 | 6.35 | 2.925 |
| 70 | J-16778 | 150 | 40 | 2 | 1.015 |
| 71 | J-16776 | 152.4 (6 in.) | 38.1 (1 1/2 in.) | 3.18 (0.125 in.) | 1.608 |
| 72 | J-16793 | 160 | 100 | 10 | 6.75 |
| 73 | J-16781 | 160 | 100 | 12 | 8.035 |
| 74 | J-16767 | 180 | 55 | 5 | 3.105 |
Alloy & Temper Selection
Our factories possess on-site foundry facilities and thus can produce a wide range of alloys. Aluminum angles are most commonly requested in the following alloys & tempers:
- 6061-T6 – For structural applications
- 6063-T52 – For railing and trim
Other alloys and tempers are available upon request. Just let us know about your requirements.
Secondary/Surface Finishing
Our facilities offer a range of finishing services and secondary operations like drilling and stamping. Common finishes include:
- Mill Finish – No special modifications
- Painted/Powder Coated – For bright colors
- Anodized – For added corrosion resistance
Other finishes are available upon request, such as wood finish (sublimation) and more. Contact us.
About Our Indian Extrusion Facilities
For companies in North America, Europe and elsewhere that are looking to keep costs low and maintain high quality, we offer extrusion services through our partner facilities in India. Together, these facilities have a combined capacity of 152,000 MTPA, with in-house foundries, tool & die shops and secondary services. They serve a range of industries, including architectural, construction, automobiles, electronics, and others. For more information, view our extrusion capabilities.
Get Great Tips From Our Blog
We regularly post helpful content to help design engineers and procurement professionals get the most out of their extrusion projects. Here are some of the latest aluminum extrusion posts on our blog.
10 Effective Ways of Joining Aluminum Extrusions: A Guide for Product Designers
Extruding aluminum offers the ability to create a wide array of profiles to meet your needs, ranging from simple to complex. While experienced designers can incorporate a variety of features into a single extruded profile, it may not be possible or practical to...
5 Important Factors That Impact the Cost of Custom Aluminum Extrusions
Ordering a custom aluminum extrusion can often be the right choice when there is nothing in regular inventory that meets your needs. Whether you need a specific profile, an unusual alloy, or a particular surface finish, knowing more about how much custom aluminum...
4 Secondary Operations to Consider for Aluminum Die Cast Parts
In previous articles, we’ve covered what happens before and during the casting process. Choosing the most suitable aluminum alloy, die design considerations, and carrying out die-casting operations are all vital stages of product development. In this article, we...